Hello

New to the site? Say hello here!

Moderators: BRONZEE, Z Club

subzeronz
Posts: 4
Joined: Tue Oct 25, 2016 5:44 pm
Location: Auckland

Hello

Post by subzeronz » Tue Oct 25, 2016 7:55 pm

Hi Team

Just introducing myself, New to the Z club


I have finally manage to get a 73 240z its going through compliance at the moment,
Will post the progress as I do the car up,

Was always in the bucket list to get a 240z since I was a teen.

At this stage few minor items have been picked up by the compliance
Need seat rails as currently the seat is bolted to the floor,
New Brake hoses/lines and needs new seatbelt.

Anyone on here have a pair of seat rails and brake hoses?

And any suggestion where I can get the seat belts done.

Looking forward to meeting some of the members at some stage.

Kind Regards

Pravin

BRONZEE
Z Club Member
Posts: 7096
Joined: Sat Jul 08, 2006 5:41 pm
Location: Auckland

Post by BRONZEE » Wed Oct 26, 2016 10:58 am

Welcome to the forum Pravin. Good luck with getting your Zed all sorted and complied. You're welcome to along to a meet in the interim in your daily til your Zed is up and running.
Next - Z Club events:
= Lots of events, check out events page or our Z Club NZ Facebook page =

User avatar
Andy
Site Admin
Posts: 2013
Joined: Tue May 09, 2006 3:48 pm
Location: Auckland

Post by Andy » Thu Oct 27, 2016 9:31 am

Hiya try http://classicseatbelts.co.nz/ for something that may look original. \

Seat rails do you mean the slidey bits bolted to the seats or are you referring to the welded on pieces running from the sill to the tunnel under the front of the seat? I'm picking if the seats are bolted to the floor the welded bits are missing.

Brake hoses are best purchased new, consider braided hoses for better performance.

Post Reply