Rear end conversion, recommendations

Restores, Revamps and Repairs

Moderators: BRONZEE, Z Club

scott h
Posts: 3
Joined: Mon Oct 07, 2019 3:57 pm

Rear end conversion, recommendations

Post by scott h » Mon Oct 07, 2019 5:44 pm

Hi all, I’m new to the Z club, after recommendations for a straight forward (if possible) rear end conversion for my 75 260z 2+2, wanting strong lsd diff, axles, discs and hubs, currently running LS3, any input / recommendations would be much appreciated.

BRONZEE
Z Club Member
Posts: 7088
Joined: Sat Jul 08, 2006 5:41 pm
Location: Auckland

Re: Rear end conversion, recommendations

Post by BRONZEE » Mon Oct 07, 2019 8:03 pm

Welcome to the forum. One of the others with old school Z knowledge will be along.
Next - Z Club events:
= Lots of events, check out events page or our Z Club NZ Facebook page =

User avatar
bernjean
Z Club Member
Posts: 1335
Joined: Fri Nov 10, 2006 6:51 pm

Re: Rear end conversion, recommendations

Post by bernjean » Tue Oct 08, 2019 8:51 am

As I understand it the R200 is mainly used when fitting more horsepower. The Longnose R200's are hard to get but the easiest to fit. You would only need a 280zx rear mount bar. Ideally, the later short nose R200 would be best but require a lot more effort and also certification to fit. You can search this on Google plenty of info on that.
Have you checked the Technical Thread on this forum? Maybe someone else has loaded info about this. I am also keen to get info on what you end up doing as it is really helpful to have this sorts of builds posted up for others. some pics of the work would be great as well.

Thanks Bernie
Bernie Kant

scott h
Posts: 3
Joined: Mon Oct 07, 2019 3:57 pm

Re: Rear end conversion, recommendations

Post by scott h » Tue Oct 08, 2019 9:49 am

Hi Bernie,

Thanks for your reply, yes I also believe the long nose r200 is a lot simplier to install, I have a good engineer involved and will certainly be getting everything certified, will post pics soon as car is currently nearing an end of a 6 month panel and paint job! Will also keep posted of which route I take for rear end conversion.

Thanks Scott

User avatar
Baker93
Z Club Member
Posts: 330
Joined: Tue Apr 01, 2008 9:39 pm
Location: Auckland

Re: Rear end conversion, recommendations

Post by Baker93 » Tue Oct 08, 2019 10:19 am

Hi Scott.
What are you using the car for ?

scott h
Posts: 3
Joined: Mon Oct 07, 2019 3:57 pm

Re: Rear end conversion, recommendations

Post by scott h » Tue Oct 08, 2019 12:14 pm

Hi there, car will predominately be used for normal weekend cruising with the odd organised street sprint, any ideas? Cheers

User avatar
Baker93
Z Club Member
Posts: 330
Joined: Tue Apr 01, 2008 9:39 pm
Location: Auckland

Re: Rear end conversion, recommendations

Post by Baker93 » Sun Oct 13, 2019 1:02 pm

R200 will be fine. Choose a good CV style rear end conversion and find 260z stub axles or get some made if they dont come with the CV conversion.

Post Reply